For ceiling installation: passive infrared presence detector thePiccola P360-100 EN ThePiccola P360-100 DE passive infrared presence detector covers a detection area of approx. 50 m² with a radius of 8 m all round. It is designed for automatic presence and brightness-dependent lighting control.
The ceiling cut-out should have a diameter of 34 to 36 mm. It can be operated fully or semi-automatically and is preset at the factory so that it is immediately ready for operation. Test operation is possible to check function and detection range.
Can be operated remotely via user remote control the Senda S, service remote control theSenda P, app remote control the Senda B (see accessories). - Mounting height: 2 to 6 m - Brightness setting range: 5 to 1,000 lux - Brightness switching value adjustable, teach-in function - Pulse function for staircase lighting timer - Light run-on time adjustable: Pulse (0.5 s), 30 s to 30 min - Mixed light measurement suitable for fluorescent lamps (F/PL/ESL), halogen/incandescent lamps and LEDs - Incandescent/halogen lamp load: 2,000 W - Fluorescent lamp load (VVG) not compensated: 2,000 VA - Fluorescent lamp load (VVG) parallel compensated: 1,300 VA 140 µF - Fluorescent lamp load (VVG) series-compensated: 2,000 VA - Fluorescent lamp load (EVG): 1,200 W - LED lamp 2 W: 600 W - Channel A light: relay, 230 V - Extension of the detection range by master/slave switching - Ambient temperature: - 20 °C to + 50 °C - Protection class IP44 (sensor), IP20 (power unit)