- splice distributor for TH35 rail- unequipped- with fiber reservoir- custom-labeled identification strips- various mounting versions on rail- splice tray with crimp splice holder for up to 12 splices / front plate can be completely removed- cable feed from top or bottom. straight or inclined. with M20 cable gland (up to 2 possible)- width: 34 mm (2HP). height: 125 mm. depth: 132.5 mm (from rail. without adapters)- can be equipped with SC-D adapters- feed of preassembled cables is possible- one cable gland M20 with strain relief included in the delivery- housing cover fastening by means of just one captive screw- unoccupied adapter recesses can be closed with special blank covers- blank cover 1x (860088-01).
2x (860088-02)- variants: with crimp splice holder. with shrink splice holder- please note: if you use preassembled cables with ST plugs. use the unequipped version of the OpDAT REG plus. The ST-D adapters required in this case are available as accessory. Before mounting the adapters in the housing. plug the preassembled ST plugs in the adapters for reasons of space.