Wideband IP Paging Adapter With Zone Control for Integrating Legacy Analog Amplifiers – PoEThe PoE 8373 IP Zone Paging Adapter provides a dry page output to a traditional zoned amplifier. thereby offering a seamless bridge from VoIP to a legacy analog voice paging / public address (PA) system. The 8373 eliminates the need for a legacy zone controller. however. the paging adapter can also be deployed to add page zones to an existing single zone system.
Three (3) zones are configurable on the paging adapter. which can be expanded using multicast. A contact closure is also available on the device.The 8373 paging adapter is a fully compliant 3rd party SIP endpoint. As a result. this IP paging adapter is compatible with most hosted / cloud and premise-based VoIP telephone systems.The 8373 SIP Zone Paging Adapter is UL/CSA.
FCC and CE certified. Consequently. there is high intelligibility and clarity of audio from the paging adapter for IP paging of voice announcements and emergency notification. The isolated and balanced line output of the 8373 ensures there is no hum or noise.The line output one the paging adapter provides a dry audio output for any amplifier with input impedance between 600 Ohm and 10 kOhm. where the line output of the paging adapter can be defined to match the input specification of the amplifier.
This means most amplifiers are supported by the 8373. Either XLR connector or terminal block is available from the paging for easy connection to an amplifier. A dry contact closure to activate the amplifier is also available. if required.Zone ControllerThe 8373 has three (3) separate speaker zones using high current internal zone control relays.
The zone control relays are activated based on the SIP extension called. multicast IP address received. or telephone DTMF keypad input. For scalability. multiple 8373 Paging Adapters can be used to support as many page zones as required from a single amplifier. Please note. however. one 8373 adapter can switch up to 280W from a single 70V amplifier or 400W on a single 100V amplifier.No ATA RequiredFor amplifiers connected to an FXS port or ATA through a ‘telephone answering device’. the 8373 IP paging adapter will replace the answering device and eliminate the need for an FXS port or analog terminal adapter (ATA).The 8373 paging adapter is only recommended to connect to a single zoned amplifier.
If the amplifier is not zoned and is only being used as a single zone the 8301 paging adapter is recommended.Where multiple amplifiers are used. one paging adapter is bridged to each amplifier. Multicast can be configured to stream audio to individual page zones or to any combination as required (e.g.. all call page zone).SIP Extensions for Voice PagingFifty (50) Page extension SIP registrations are available in the 8373 adapter.
When the Page extension is called the 8373 will auto-answer allowing for public address (PA) voice announcements from the telephone. For user convenience. an extension can be mapped to each of the zone outputs on the paging adapter. allowing for immediate voice paging to the desired zone. A single registered paging adapter can be configured to multicast to any number and mix of Algo IP speakers. strobe lights. paging adapters and multicast supported IP telephones.
Multicast can also be mapped to a specific zone on the 8373 or any combination of zones.A deployment to cover any size building. campus (e.g.. classrooms in a school. college or university) or enterprise is possible using multicast. There is no limit to the number of devices part of a multicast. and a minimum of network traffic activity is utilized.Multicast provides cost effective scalability using a minimum of SIP registered endpoints. as only the endpoint designated to send the multicast needs to be registered.